Bee Safe Platinum 20 Safety & Security Glass Coatings Edmonton
Untreated
After Bee Safe Platinum 20 Security Film Edmonton
Bee Safe Platinum 20 Security Film Edmonton
Safety & Security Glass Coating Edmonton
Bee Cool Glass Coating Edmonton's Bee Safe Platinum 20 is a reflective safety and security glass coating, window tint, which provides excellent heat rejection and a mirrored look from the outside. This product is fantastic for large Edmonton buildings looking to dramatically reduce HVAC costs and increase security. Also used when air conditioning cannot sufficiently balance the temperature of a building, virtually eliminating hot and cold spots.
Bee Cool Glass Coating Edmonton's Bee Safe Glass films are virtually clear and incredibly strong. They are designed to withstand hurricane force winds, explosive pressure, vandalism, large and small high velocity debris. Bee Cool Glass Coating Edmonton's films provide the maximum amounts of physical protection, optical clarity and aesthetic value. By also stopping 99% of harmful UV rays, they help ensure that your merchandise and property continue to look new for longer.
- Designed for safety, security and blast appplications.
- Advanced adhesion formulation holds broken glass together.
- Totally transparent, superior optical clarity and glare reduction with excellent solar performance.
- Blocks over 99% of the sun's damaging ultraviolet rays, keeping upholstery, carpet and window treatments looking new for longer.
- Blocks 79% of the sun's total energy, keeping your home or office significantly more comfortable.
- Durable scratch-resistant coating.
- Increases personal safety by minimizing flying glass in the event of breakage.
Broken glass can create a significant safety issue. Often when glass is smashed, small shards are scattered throughout the area. These small pieces of glass are difficult and dangerous to clean up. Bee Cool Glass Coating Edmonton's Safety and Security Glass laminates bond to the glass, helping to keep it from scattering throughout your Edmonton building, providing a barrier between broken glass and contact with any passers by, while removing a potential intruder's ability to gain quick and easy access.
- Bee Cool Glass Coating Edmonton's Safety & Security Glass films have been evaluated according to the following test methods and standards:
- Small Missile Impact Test - ANSI Z-97.1 and CPSC 16 CFR 1201
- Large Missile Impact & Cyclic Wind Pressure Tests - ASTM E 1886-02 / ASTM E 1996-03, Level C, 4.5 lb 2" x 4"
- GSA Explosive Test - GSA-TS01-2003
- Flame Spread and Smoke Developed Test - ASTM E-84
| Bee Safe Platinum 20 Security Film Edmonton Specifications | |
| UV Rejected | 99% |
| Glare Reduction | 84% |
| Winter Heat Loss Reduction | 15% |
| Total Solar Energy Rejected | 79% |
| Visible Light Transmittance | 15% |
| Total Solar Transmittance | 12% |
| Total Solar Reflectance | 55% |
| Total Solar Absorbance | 33% |
| Interior Visible Light Reflectance | 58% |
| Exterior Visible Light Reflectance | 60% |
| Winter U-Value | 0.94 |
| Shading Coefficient | 0.24 |
| Solar Heat Gain Coefficient | 0.21 |
| Physical Properties | |
| Film Thickness | 0.008" |
| Single or Multi-Ply | Multi |
| Tensile Strength | 30,400 psi |
| Break Strength | 265 lbs/inch |
| Elongation at Break | > 100% |
| Peel Strength | 2750 g/inch |
| Puncture Strength | 173 lbs |
| Note: all data values above are representative and are provided for comparison purposes only. | |
